So I’m in the kitchen in the middle of the day are willing to see themselves sitting at a football match, I go into the oven with the mini-hot dogs, always ready to settle in when it happened … I sweat!

That’s when I decided to ceiling fan installation. A ceiling fan provides many functional advantages while adding a decorative touch to a room. In the summer it can help cool a room (or even a porch). In winter it can be used at low speeds, to circulate warm air, the ceiling rose.

Whatever your reason for installing a ceiling fan, you’ll find a relatively simple project, especially if you’re replacing a bulb in the middle of a room (all the wiring is already should). Probably your biggest obstacle to a new work box that the weight of a fan or adding support to an existing work-box, work box one that is not approved for ceiling fan’s weight can lead to a disaster, be approved!

The following instructions are for the general equipment in the exchange of an existing light. It gives you an idea of what is needed for the project. Make sure to write down and follow the instructions specific to the fan to buy. Depending on your installation requirements, you may need a longer “down rod” for the purchase or acquisition of an optional cathedral ceiling light kit, if it is not included.

1) Turn off the circuit by turning off the switch. Remove the existing ceiling light.

2) Determine whether your existing work-box is sufficient support. If you have access to the work-box of your attic, check to see if the work box is metal sleepers, the span between two joists. If not, you can always have a 2 “x4″ to adapt between the beams. Install it so the tip touches the work box. Anchor the wood instead. From the room, use 1 “drywall screws to the box to the wood anchor bracket.

3) If you can not access to the attic, you can install the metal crossbar through the hole in your ceiling and then you have roughly one professional working the metal box.

4) I hate this part! Mount the fan to the manufacturer’s instructions provided. When you are ready to hang the fan, remove the bracket and install the work-box to the ceiling. Some fans come with a hanging frame that allows you to hook the ball end of the bar downstairs instead. Others come with a clip, a “J” hook to hang the motor while you connecting is

5) When a light from the ceiling, probably the existing wiring is a circuit switched to your new ceiling fan. This means that the wall switch will function as a switch the device off and on. The pull chain on the fan will also control the fan (and speed). If you have an optional kit to light the fan, both the wall switch and a pull-chain control.

6) in accordance with the schedule with the fan, connect the wires with wire nuts. Most likely, this is as simple as connecting the two black wires, connect the two white wires and grounding wire connects the two.

7) If the fan is connected to an end, the fitting of specific manufacturer’s instructions. You need to install the hood on the head of the rod.

You must also attach the fan blades. If you are installing a light kit, remove the lid on the bottom of the fan with light kit is mounted. According to the manufacturer’s instructions, assemble and install the light kit.
At this point you are ready to switch back on and enjoy your new ceiling fan.